Tajima

Blower Integrated with the main power supply Electrical Output Single Phase 110, ordinary household outlet Exhaust System 3 Stage 3 Speed System with a 3 stage poly, HEPA and chemical activated fume extractor Hoop Size TFMX-C1501 16.5" x 19" x 22" diagonal Laser Power 10W Nominal with a maximum output of 18W Laser Source Synrad CO2 Sealed Type Long Life 25,000 hours air cooled Power Usage Less than 1 kw/hr Software and File Format Cutting Speed 80 mm/sec Spot Size 100 Micron, adjustable The Single Head Laser on a Tajima M-1501. Simple, clean Minimizes space and can be easily maneuvered around. settings for system operation and power control of the laser. Cutting is controlled by power percentage. Example would be t-shirt knit which is cut at 8% or 9% power. The indexing dial makes for easy and repeatable settings of the lens height. There are also indexing marks to verify height adjustment. In addition, the head assembly has an application area. integrate with Tajima M-Series embroidery machines. System is wired through the embroidery for a on the application area for a clear work area while helping to maintain a clean lens. The Smoke Extractor allows placement of the Single Head Laser in any facility without concern of outside venting. Recommendation for replacement is every three months depending on usage. Seit single head laser works with caps for a full line of appliquéd products. Features Appliqué Reverse Appliqué Specs

• Cover