Issue link: https://docs.hic.us/i/445631
Safety Precautions 3 1 2 3 4 5 6 7 8 9 10 11 Chapter 1 SQ01 Stop the machine before threading into the needle and checking the finish of embroidery. For the machine with the sub table, lift up and fix the sub table securely after threading and/or adjusting the machine. Do not damage, modify or heat the power or other cables. Do not exert undue force to them, either. Otherwise the cables will be damaged causing fire and electric shock. Insert the power cable plug fully. If a metallic part touches a blade in the plug, it may cause fire and/or electric shock. Keep away electrical units from water and chemicals. Entry or splashing of them into control units leads to short circuits, causing fire, electric shock and other troubles. If water or other chemicals enter the unit, shut off the power at the primary power source of the machine and contact your local distributor. Turn off the primary power source before opening the electrical boxes. Be sure to turn off the power switch of the machine before turning off the primary power source. If not, it may cause electric shock. ! WARNING Primary power supply Power switch