Issue link: https://docs.hic.us/i/852286
58 Autograph Writer Notes on Raised Lettering: Text with Outlines For a lettering object in which Fill with Outline is applied in addition to the Raised setting, the special settings (increased density, underlay) will only be applied to the "center" stitches, and not to the "border" stitches. In this case, the border stitches will always be laid down before the center stitches. Therefore, to apply 3D foam to lettering like this, you will want to first sew the border, place the foam, and then sew the center stitches. For more information, see "Fill with Outline." Changing a Design If you have selected a design (rather than text) in the workspace, you will see a different set of controls on the Start tab. One of these will be the Change... button. This opens the Design Gallery, a dialog box that allows you to replace the selected design. There are two ways that you can change the design in your template: • Select from the categories tab: This will show you a list of designs that come pre-loaded with the Autograph software • Select from the Browser: This allows you to choose a design from the any drive that is accessible from your computer. To replace a design from the categories list: 1) In the toolbar, click Select tool. 2) Click on the design to select it. The design will be highlighted by a selection box. 3) In the Start tab, click the Change... button. The Design Gallery will open in a new window.