Issue link: https://docs.hic.us/i/852286
Output Tools and Settings 89 from the machine's control panel (i.e. LAN or multi-directional serial machines). 6 From the LAN Machine Support list, select one of the following ways to control how to communicate with LAN enabled embroidery machines: Disabled. Enabled. 7 In the Data Collection DB, click the browse button to the location where reporting data is created (only active when the spooler being used is the local spooler). 8 To save your changes, click OK. Viewing Machine Status You can view embroidery machine information in real time, or collect data for reporting. Before viewing embroidery machine information, your machine must be setup to send data to your software. Receiving Data from your Embroidery Machine The following steps are for a two-head Tajima machine. Check your embroidery machine's documentation to find out how to set the machine to network. To receive data from your embroidery machine: 1 Make sure your embroidery machine is set to network so two-way information can be communicated from the machine to the software and vice-versa. 2 Press F4 on the Tajima control panel. (NW is displayed.) 3 Turn the dial and set it to "0" to enable the network connection. 4 Open a stitch design in Autograph Writer. Only one design spooler can have this setting enabled at one time. What you select depends on the Tajima model you have.