Steeper Tilt Head + Versatile Cap Driver
The Steeper Tilt Head angles the bill of a cap more
which allows stitching closer to the edge of the bill and
increases the embroidery area.
The cap driver incorporates a lower shaft and a third
locking pin to stabilize the cap during embroidery to
enhance quality and allows cap production at high
speeds.
W W W.HSI.US I C A RE@ HSI.US I 8 0 0.394.4 426
2 0
TFMX-IISC (caps on 360 interval)
TFMX-IISC 1508/500
8 HEAD TFMX-IISC
50 0mm "Stretch" Head Inter val
*510mm x 450mm hoop is replaced with 510mm x 310mm
on machines with 360mm "Standard" Head Interval
1 2 c m 1 5 c m 1 8 c m
I N C L U D E D H O O P S (1 6 o f e a c h )
5 1 0 m m x 4 5 0 m m*
3 3 8 m m x 3 3 8 m m
2 7 0
o
* * * * *
All TFMX-IISC model s can be switched from tubular goods to cap dr iver with no tool s required
* * * * *
NEEDLES
HEAD INTERVAL
MAX SPEED
TUBULAR EMB. FIELD (mm)
TUBULAR EMB. FIELD (in)
CAP EMBROIDERY FIELD
MACHINE DIMENSIONS
MACHINE WEIGHT
MIN. DOOR CLEARANCE
15
360mm
1
00 SPM
439mm X 279mm
17.3" X 11"
75mm x 360mm / 3" x 14.2"
144"W x 54"D x 69"H
1446 lbs
32" W
15
500mm
1
00 SPM
439mm X 419mm
17.3" x 16.5"
75mm x 360mm / 3" x 14.2"
193"W x 54"D x 69"H
1899 lbs
32" W
8 H E A D S TA N DA R D S T R E TC H
