Brother

For 1 Minute 1' 5 cm 1' 15 cm 15 cm 5 cm ALIGN NO WRINKLES CLICK PUSH to ROLL Deflection & Flash Firing > Repeat the same process as needed up to 3 times and ensure all maintenance has been performed such as cleaning the cap and wiper blade and the wiper cassette is fresh and still has moisture. If there is no improvement by the 4th time; please contact support. 8 Deflection appears as odd bunched up or gapped lines sometimes the horizontal bars will appear blurred and staggered. When this is present you will want to perform a Flash Fire Cleaning. If Missing 10 or More Only a few If Missing On the Panel Select ↓ Head Cleaning ↓ Powerful Cleaning ↓ Choose the Affected Color/Channel ↓ Press OK ↓ Perform Another Nozzle Test Print On the Panel Select ↓ Head Cleaning ↓ Super Cleaning ↓ Choose the Affected Color/Channel ↓ Press OK ↓ Perform Another Nozzle Test Print Then Then Missing Nozzles are defined by a test print pattern missing horizontal pins (that represent each of the nozzles of the print head) being closed up with debris and therefore not showing up. When nozzles/pins are missing you will want to perform one of the below indicated cleanings. NOTE: This process can be used for CMYK or White Missing Nozzles & Deflection Cleanings & Flash Firing If this does not resolve the matter please contact your dealer or brother representative for further troubleshooting. On the Panel Select ↓ Head Cleaning ↓ Flash Cleaning ↓ Choose the Affected Color/Channel ↓ Press OK ↓ Perform Another Nozzle Test Print If then

• Cover