Check items before embroidering
59
Chapter 4
SQ06
(2) To select maximum speed
Selection of the value exceeding "Max. Revolution Limit" is not possible.
To change the maximum speed during operation of the machine, turn the jog dial / the jog shuttle.
6-2. Presser foot setting (TMBR-SC only)
Adjust the height of the presser foot according to thickness of fabric to use.
6-2-1. Screen
[a] Distance between the presser foot and the needle plate when the presser foot moves down to
the lower dead point
Setting range: 0.3 to 6.3 (mm)
950 rpm
While turning the jog dial, the following display appears.
The number described in [ ] is the maximum speed.
[850]
2 Presser Foot
F4
Lower dead point
[a]
F/B L. D. point
Stroke
Timing
0.8
+5
A
0
Lowest position of presser foot when performing
Frame Back
Lowest position of presser foot
[b]
[c]
Stroke mode of presser foot
[d]
Timing when presser foot moves down
Presser foot
Needle plate
Space
When setting this value, do not press the fabric too strong.
The presser foot may leave its pressed mark on the fabric.
