Check items before embroidering
60
Chapter 4
SQ06
[b] Lowest position of presser foot when performing Frame Back
Setting range: +5 to +22 (mm)
[c] Stroke mode of presser foot
Setting range: A, 2.0 to 22.0 (mm)
A:
2.0 to 22.0 (mm):
[d] Timing when presser foot moves down
Setting range: -20 to +20
6-2-2. How to operate
The following is an example of setting Presser foot lower dead point to 1.0 (mm) and FB lower dead point to
10.0 (mm).
(1) To open screen
(2) To select presser foot lower dead point
(3) To select FB lower dead point
According to maximum speed of the machine, the presser foot will perform Stroke
automatically (usual setting).
Stroke amount of presser foot
The maximum speed of the machine is limited depending on stroke
amount. (The stroke amount is always fixed.)
-20 +20
Fast Slow
2 Presser Foot
1.0
10.0
