Issue link: https://docs.hic.us/i/403552
Suggested Placements & Applications This section includes recommended placements and applications for embroidery on popular garments. These are not hard fast rules. Placements will be affected by garment size and style, both of which vary between brands. Use this information as a starting point, but change the parameters as needed to accomplish the task. Knit Shirts (golf, polo and t-shirts) Backing One layer cutaway. Topping Should be used with textured knits. Needle 75/11 ball-point point, depending upon the design. Logo Placements Left or Right Chest 7" to 8" down from the shoulder seam and 3 1/2" to 5" over from center of placket. Left or Right Sleeve Bottom of design 2" above edge of sleeve. (SS only) Top Center Back Top of design 2" below bottom edge of collar. Full Back or Front Top of design 3" - 4" below base of neck. Above Pocket Bottom of design 1/2" above top edge of pocket. Fleece Shirts/Sweatshirts Backing One layer cutaway. Topping Should be used with textured or thick fabrics. Needle 75/11 ball-point, depending upon the design. Logo Placements Left or Right Chest 7" to 8" down from the shoulder seam and 3 1/2" to 5" over from center of shirt. Top Center Back Top of design 2" below bottom edge of collar. Hooded shirts will cover the logo when hood is not worn. Full Back or Front Top of design 3" - 4" below base of neck. Hooded shirts will cover the logo when hood is not worn. www.hsi.us care@hsi.us 211