TEMX-C
Cylinder Arm type
Series
T E C H N O L O G Y
Spiral tube, Take-up lever guard ,
paying attention to safety
Spiral tubes between the upper thread course stand and the individual
tension base protect upper threads against environmental wind,
generated by air conditions etc. which causes thread to be entangled
with each other.
Furthermore, uniquely developed covers are mounted onto the take-up
levers to prevent threads from being entangled during high-speed
operation and to improve safety in the working surroundings.
Rotary disk
Rotary disk, cut in a unique shape, rotates
without slippage, following the thread feed.
The slit plate also rotates
in synchronization. And if the rotation is
stopped for some reason, the sensor
detects it and stops embroidery machine
operation in an instant.
Thread breakage detecting system
for prevention of production error
A sensor monitors thread movement at all times.
If the upper or
under thread is broken, this system detects it in an instant and stops
stitching to prevent embroidery production from continuing with
broken thread. The sensitivity of the sensor is adjustable on the
operation panel, depending
on the embroidery conditions.
Ball screw drive system has been adopted to reduce the time
for color change operation drastically
The Ball screw drive system, widely used for high precision position
control of industrial machinery, has been introduced to the color
change drive system. The time required for the color change from
the first to the ninth needles has been reduced from about 3 to 1.1
s e c o n d s , d r a s t i c a l l y i m p r o v i n g p r o d u c t i v i t y o f m u l t i c o l o r
embroidery.
Middle thread guide with thread take-up lever ,
keeping the balance of upper and under threads.
Thread take-up springs pick up excess thread and stabilize the
balance of the upper and lower threads during high speed operation
improving thread tension. Thread breakage due to extra fine satin
stitches (2mm or less), needle tip or thread untwisting etc. has been
reduced by 30 - 50% (compared with our conventional specification).
Thread take-up spring is mounted closer
to needle position and has improved the
response to the timing to take up thread.
Spiral tube Take-up lever guard
M U L T I F R A M E
Sensor
Thread
Slit plate
Rotary disk
Adult-use
Clip type
Tubular goods frame
Plastic made frames suitable
for embroidery on tubular products
likeT-shirts, sweat shirts or uniforms.
Select from many frame sizes to your
product.
Cap frame
A wide cap frame for embroidery on
finished caps. Irrespective of cap
t y p e , e m b r o i d e r y s p a c e o f t h i s
frame covers max.360mm in length
on the circumference of caps (for
adult use). Attachment/detachment
of caps on the cap frames is made
easy by one-touch operation.
3 kinds of frames are available
adult-use, child-use and baby-use
types.
Cylindrical frame
Special frame to apply embroidery
on cylindrically-shaped products
like golf head covers or wine bottles.
Either Clip type or Clamp type is
selectable according to necessary
embroidery space.
Pocket frame
An embroidery frame to apply
embroidery on small pockets.
Best suited for small size embroidery
such as monogramming.
Clamp type
Child-use
