Issue link: https://docs.hic.us/i/852286
46 Autograph Writer Height Determines the height of lettering in your text object. To change the height of the text: 1) Select the text object. 2) In the height field of the Object tab, type a new value. 3) Click the Apply button at the bottom of the object tab. The letter height will be adjusted accordingly. Font Spacing The Spacing setting allows you to add a specified amount of space between each letter. If the spacing is set at zero, the normal kerning operation is used. If the spacing is set to less than zero, then the spacing decreases; if it is set to a value greater than zero, than the spacing increases. To change font spacing: 1) Use the Select tool to select a text object. 2) Open the Start tab 3) In the spacing field, enter the font spacing you want to apply. 4) Click Apply to save your changes. You see your text's letter spacing altered accordingly. Density Setting Satin stitch density is measured embroidery points (pts). This is measured as the distance between stitches (each point = 0.1 mm). You adjust density according to the design's size and the fabric you are using. To change the density of a text object: 1) With the Select tool, select the text. 2) In the density field, enter a new density value; higher numbers correspond to lower density, lower numbers correspond to higher density. 3) Click the Apply button. The density will be applied to the selected object.