Brother

GTXpro Daily Operations Guide [H]

Issue link: https://docs.hic.us/i/1453905

Contents of this Issue

Navigation

Page 8 of 13

9 WEEKLY MAINTENANCE: Suction Cap Cleaning WEEKLY MAINTENANCE: Exhaust Cap & Lances WEEKLY MAINTENANCE: Wiper Cleaning The black silicone lips of the two suction caps should be cleaned with the Cleaning Stick T dipped in Cleaning Solution. The four extrusion lances and the 2 holes [see in the blue circle] are located adjacent to the suction caps at the Exhaust position. They need to be cleaned and free of dried ink. Always JSLHU[OLÄYZ[ holeH[[OLMYVU[HUKNVIHJR^HYK^OPSLJSLHUPUN[OLSHUJLZJHYLM\SS`ÄUPZOPUN^P[O[OLSHZ[OVSL Both white plastic wipers [White & CMYK] should be cleaned on both sides and tops with the Cleaning Stick T dipped in Cleaning Solution. Use the tip of the Cleaning Stick T to clean under the teeth of the wiper holder and remove the dried ink. Be sure to use the Cleaning Stick T separately for white ink and color ink. It is necessary to remove the build-up of excess ink located on the edges of the caps. It will prevent air leakage and maintain optimal suction of the pumps. Be careful not to touch the foam. 2LLWP[ÅH[ *SLHUPUN:[PJR; ,_OH\Z[*SLHUPUN *SLHUPUN[VWVM^PWLY *SLHUPUN\UKLY[OL [LL[OVUZPKLVM^PWLY +PYLJ[PVU[VJSLHU -V\YL_[Y\ZPVUSHUJLZ :\J[PVU*HW*SLHUPUN If a more thorough cleaning is required, refer to removal of wiper in the instruction manual for a detailed cleaning.

Articles in this issue

view archives of Brother - GTXpro Daily Operations Guide [H]