Issue link: https://docs.hic.us/i/445658
84 To save design, to change design name Chapter 6 QS08 When the file name is changed, follow the procedure below. When the file name is not changed, proceed to the next operation after setting. Change the file name of writing design 1. (Example: G0009) Change the file name of writing design 2 continuously. (Example: G0010) (1) G0009 [1] [1]Input the number or alphabet. (Up to 20 characters) Characters input here will become a file name on a personal computer. (2) To set (3) T3 [2] [2]Select "T3" usually. When "T3" is selected, the setting of the presser foot and the frame type will be saved into USB memory. (4) Saving format (5) To set (6) G0010 (7) To set (Completed) G0009 Design name: W-TAJIMA Write file name. G0009.TCF File name on personal computer G0009 Design name: W-TAJIMA Write file name. G j T3 Design name: W-TAJIMA Write file name. Design name: W-TAJIMA Write file name. Save the design with the same saving mode. Save the design with the different saving mode. Design name: W-TAJIMA Write file name. S G0010 Design name: LEAVE Write file name. G0010 Design name: LEAVE Write file name. G