Issue link: https://docs.hic.us/i/445658
Page P7 163 Chapter 9 G 6-1. 71 R.P.M. setting 2 Low speed r.p.m./ Low speed code r.p.m. (Input of the password is necessary) Set the most decreased embroidery speed (Low speed r.p.m.) and the embroidery speed at low speed code section (Low speed code r.p.m.) 3 Start/ATH inching r.p.m. (Input of the password is necessary) Start inchings After stopping the machine during embroidery, set the embroidery speed at slow operation performing when the operation starts again. ATH Inchings Set embroidery speed at slow operation performed when starting operation after data set and after thread trimming. Setting range Low speed R.P.M.: 250 to 600 rpm Low speed code R.P.M.: 250 to Maximum r.p.m. of machine Example: Set Low speed R.P.M. to 550 rpm. Setting range Start inchings: 80 to 200 rpm ATH Inchings: 80 to 140 rpm Example: Set Start inching R.P.M. to "120". 2 Low Speed/L.S. code R.P.M. 550 850 Low speed R.P.M. Low speed code R.P.M. G q r 550 3Start/ATH inching r.p.m. Start inchings 120 ATH Inchings 100 G q r 120 Start inchings QS11