Service Documents

TMARK INSTRUCTION 7.2014

Issue link: https://docs.hic.us/i/445658

Contents of this Issue

Navigation

Page 72 of 261

58 To start embroidering Chapter 4 RR01 8. Start of embroidery 8-1. Start switch/Stop switch 8-2. Countermeasure against thread breakage The machine will stop automatically. Besides, the left lamp at the head with thread breakage will switch to red (lit, or blinking). Code No.291 indicating the thread breakage will be also displayed on the operation panel. (→p.208) Before the start of the operation, pay enough attention to the surrounding safety. Moving the needle bar and/or the frame could injure you. (1) When starting the operation, press the start switch. If the start switch is kept on pressing during the operation, the embroidery speed will go down and become slow operation. (2) To start slow operation from the state that the machine stops, keep on pressing the start switch. Releasing it will become normal operation. (3) To stop the machine, press the stop switch. Start switch Stop switch CAUTION ! Condition of left lamp Lighting: The upper thread is broken. Blinking: The under thread is broken. Left lamp Head without thread breakage Head with thread breakage

Articles in this issue

view archives of Service Documents - TMARK INSTRUCTION 7.2014