Issue link: https://docs.hic.us/i/445658
166 Page P7 Chapter 9 G 6-3. 73 Design Setting 2 Condition data (Input of the password is necessary) When you register the design saved in USB memory into the machine memory, set whether the Condition Data (Color Change Sequence, Start Position, Presser Foot Setting) are registered together with the design into the machine memory or not.(→p.196) 3 Automatic design rotation 180° (Input of the password is necessary) This setting rotates a design by 180° automatically at data set. (→p.33) Other designs in the machine memory are not affected. This function rotates a design not in design unit like "Data Conversion" but for each type of frame. Setting range Yes: It will be registered into the machine memory. No: It will not be registered into the machine memory. Example: Yes Setting range Yes: Rotate a design by 180° for following frame types. No: Do not rotate a design. Example: Rotate a design by 180° at cap frame specification. 2 Condition data Yes G Yes r 3 Automatic design rotation (180 deg.) Yes Tubular goods frame, Border frame, Cap frame Border frame Tubular goods frame Cap frame It is also possible to select plural frame types. Yes r G RR04