Issue link: https://docs.hic.us/i/445658
164 Page P7 Chapter 9 G 6-2. 72 Stitch compensation 1 Backlash (X) (Input of the password is necessary) Correct driving error of the frame generated when a stitch turns back in crosswise direction. 2 Backlash (Y) (Input of the password is necessary) Correct driving error of the frame generated when a stitch turns back in lengthwise direction. 3 Satin Stitch (area) (Input of the password is necessary) Set a target range of Satin stitch (data to add). Setting range: -5 to +5 mm Example: Execute correction by 0.5 mm. If the value is input, the setting of Satin stitch will be invalid. Setting range: -5 to +5 mm Example: Execute correction by 0.5 mm. If the value is input, the setting of Satin stitch will be invalid. Setting range Whole: All Satin stitches in design Part: Function code "Satin stitch" section No: It is not added. Example: Part 1 Backlash (X) 0.5 mm G 5 2.0 mm 1.5 mm 0.5 mm Design Finish of sewing Correction by +0.5 mm 2 Backlash (Y) 0.5 mm G 5 3 Satin Stitch (area) Part G s t Part QS11