Issue link: https://docs.hic.us/i/445658
Page P3 149 Chapter 9 G 23 Return Stitches Set the number of Return stitch and stitch length performed at start of embroidery by all needles in a batch or by needle bar unit. 24 Tie stitches Set Tie stitch pattern and stitch length to be executed before thread trimming by all needles in a batch or by needle bar unit. Setting range Return stitches Any: All needles in a batch 1st to last needle: Needle bar No. 0 to 2: Number of return stitches Stitch Length Any: All needles in a batch 1st to last needle: Needle bar No. 0.6, 0.8, 1.0, 1.2, 1.6, 2.0: Return stitch length (mm) Example: Set to 2nd needle, Return stitch, and 2.0 mm of stitch length. Setting range Tie stitch Any: All needles in a batch 1st to last needle: Needle bar No. A to E: Tie stitching methods 23Return stitches Return stitch Stitch Length 3 4 2 2 3 2 Any 0.8 2 G u v 1 k Stitch Length r q 2 u v 2.0 r q 24 Tie stitches Tie stitch Stitch Length 3 4 2 2 3 2 Any 0.8 Tie stitching is not performed. A: Tie stitching is performed. B: After embroidering 2 stitches at the same place, tie stitch- ing will be performed. C: Tie stitching will be performed twice. D: B and D are switched to the direction of Tie stitches. E: QS11