Service Documents

TMARK INSTRUCTION 7.2014

Issue link: https://docs.hic.us/i/445658

Contents of this Issue

Navigation

Page 23 of 261

Important warning items for safe operation (UL-spec., CSA-spec.) 9 Chapter 1 [If the product is used in a nominal rating up to 120V] This product is for use on a nominal 120V circuit, and has a grounding plug that looks like the plug illustrated in sketch A in Figure-1. A temporary adaptor, which looks like the adaptor illustrated in sketches B and C, may be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The temporary adaptor should be used only until a properly grounded outlet can be installed by a qualified electrician. The green colored rigid ear, lug, and the like, extending from the adaptor must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be held in place by the metal screw. [If the product is used in a nominal rating more than 120V] This product is for use on a circuit having a nominal rating more than 120V, and is factory equipped with a specific electric cord and plug that looks like the plug illustrated in sketch D in Figure-1. No adapter should be used with this product. If the product must be reconnected for use on a different type of electric circuit, the reconnection should be made by qualified service personnel; and after the reconnection, the product should comply with all local codes and ordinances. DANGER ! ! ) B ( ) A ( (C) (D) Figure-1 Grounding methods Grounding pin Metal screw Cover of grounded outlet box Cover of grounded outlet box Cover of grounded outlet box Grounding pin Grounding means Adapter QS04

Articles in this issue

view archives of Service Documents - TMARK INSTRUCTION 7.2014