244
Terminology
Chapter 12
QS04R
Z-axis
Driving shaft to change needle height (TCMX series).
Zigzag cord needle
Needle that sews cord in zigzag cording device. It
indicates the first needle or the last needle.
Table offset
To move the frame to the rear direction temporarily to
facilitate threading. It is mainly effective when the
frame is positioned at table cut section.
Tatami stitch
Stitch to be filled in a certain amount of area. It is
mainly used for big logo, background, underlay etc.
TBF
Stitch data of Tajima binary format. Data saving
format
is T2. It can correspond much more function
codes compared with DST. It is necessary to handle
TBF, CT0 and DGF as a set on a personal computer.
TCF
Data integrating TBF, CT0 and DGF. Integration
facilitates handling of design data. Data saving
format is T3.
Tie Stitches
Tie stitch to be executed before thread trimming
(stitch to prevent fray).
X data
Data to make the embroidery frame move in
crosswise (X) direction. It is indicated by moving
direction (code: +/-) and value (mm).
X-axis drive system
Drive system to make the embroidery frame move in
crosswise (X) direction.
Y data
Data to make the embroidery frame move in
lengthwise (Y) direction. It is indicated by moving
direction (code: +/-) and value (mm).
Y-axis drive system
Drive system to make the embroidery frame move in
lengthwise (Y) direction.
