Issue link: https://docs.hic.us/i/445658
Table of contents RR04 3-3. To return the frame to the start position(Start position return)............................................. 68 3-4. To move the frame to the registered position (Offset return)............................................... 68 3-5. To make the machine memorize the frame origin (Absolute origin search) ........................ 69 3-6. Return operation when power is shut off (Power resume) .................................................. 70 4. Raising and lowering of needle bar ................................................................................................ 71 4-1. To lower the needle bar....................................................................................................... 71 4-2. To raise the needle bar ....................................................................................................... 71 4-3. To lower the needle bar to the lower dead point ................................................................. 72 5. Moving up and down of presser foot .............................................................................................. 73 5-1. To move up/down the presser foot ...................................................................................... 73 5-2. To adjust the height of the presser foot according to the fabric .......................................... 74 6. Others............................................................................................................................................. 76 6-1. To turn ON/OFF the LED lamp............................................................................................ 76 6-2. Machine log data acquisition ............................................................................................... 77 Chapter 6 Delete, save and edit of design 1. To delete design ............................................................................................................................. 80 1-1. To delete a design in the machine memory in one design units.......................................... 80 1-2. To delete plural designs in machine memory ...................................................................... 81 1-3. To delete a design in USB memory..................................................................................... 82 2. To save design, to change design name........................................................................................ 83 2-1. To write a design into USB memory (Input of the password is necessary) ......................... 83 2-2. To change the saving place of a design .............................................................................. 85 2-3. To change the design name ................................................................................................ 86 3. To edit design ................................................................................................................................. 87 3-1. To specify the stitch No. to search a stitch .......................................................................... 87 3-2. To specify the function code and search a stitch ................................................................ 88 3-3. To insert a stitch (Input of the password is necessary) ....................................................... 89 3-4. To delete a stitch (Input of the password is necessary) ...................................................... 91 3-5. To modify a stitch (Input of the password is necessary)...................................................... 92 3-6. To delete small stitches ....................................................................................................... 93 4. To copy, divide and combine design .............................................................................................. 95 4-1. To copy a design ................................................................................................................. 95 4-2. To divide a design ............................................................................................................... 96 4-3. To combine a design ........................................................................................................... 97