Issue link: https://docs.hic.us/i/852277
77 Chapter 6 Setting the Machine 6 This setting determines whether or not a permissible range of movement (frame limits) for the frame is to be set. The machine is originally set so that the frame cannot be moved beyond the range inside the frame in which embroidery can be performed. This is in order to prevent needles or the presser foot from hitting the frame while embroidery is in progress. When this setting is disabled ([NO]), the embroidery range can be extended to the maximum, up to the point immediately before the needle or presser foot might hit the frame. 1. Tap on the Home screen. The Setting screen is displayed. 2. Tap . The Frame Setting screen is displayed. 3. Tap [YES] or [NO] for [Frame limit setting]. • To move the frame only within the area defined by the frame limits, and stop the embroidery whenever the frame limits are exceeded: [YES] (default setting) • To have the frame not stop at the frame limits: [NO] 6.2.4 Setting the permissible range of movement for the frame Caution With this setting disabled, the needle or presser foot may come into contact with the frame during embroidery, resulting in possible damages. Whenever possible, embroidery should be carried out with frame limits enabled ([YES]). In order to make this setting, the frame origin needs to be correctly stored in memory. "6.2.2 Memorizing the frame origin"