Issue link: https://docs.hic.us/i/852277
31 Chapter 3 How to Perform Embroidery 3 With some designs, the thread color and needle number for each step (order, for each color, in which embroidery is to take place) are already assigned in the design. Even without changing the settings for steps, for each step in the design, the upper thread of the color that you want to embroider can be set for the set needle No., allowing embroidery to take place using the correct color order. Also, even if steps are stored in the design, the needle number of the upper thread actually used in the embroidery can be changed. Additionally, when you want to use a design that has no steps assigned to it, you can set the appropriate needle numbers and then carry out embroidery. Here, we will explain the procedure for changing the needle No. of a step. For details on setting steps: "4.6 Editing the steps of a design" 1. On the Needle No. Setting screen, tap the icon for the first step. 2. Tap the needle No. (1 to 8) that has the thread of the color that you want to assign to step 1. 3. Repeat steps 1 and 2 until all steps have a needle number assigned to them. 4. Tap . The Start Point Setting screen is displayed. 3.2.2 Setting the needle number If a design that does not have steps assigned within it is loaded, all of the steps from needle No. 1 to No. 8 are assigned, in order.