Issue link: https://docs.hic.us/i/852277
34 Chapter 3 How to Perform Embroidery 3 By using the trace function, which moves the frame in accordance with the contour of the design, you can find out whether the embroidery design is appropriate or not, and whether the allowable area for embroidery will be exceeded or not. 1. Tap on the Trace screen. The confirmation screen is displayed. 2. Tap [YES]. The laser crosshair marker lights, the frame moves in accordance with the contour of the design, and traces the path shown to the right. While the trace is in progress, an hourglass is displayed on the screen. This indication disappears when the trace is completed. 3.2.5 Confirming that the design fits within the embroidery area Caution Keep hands away from the area surrounding the frame and needle bar case while the trace is being carried out. Otherwise, there is a risk of injury due to the movement of the frame and needle bar case. If the needle position is not at the position of the laser crosshair marker before the trace is started, the needle position moves to the position of the laser crosshair marker first, and after that, the trace starts. If you want to change the embroidery position, use the icon to display the frame travel keys, and then move the frame. To pause a trace while it is in progress, press the [STOP] button on the operation panel. To continue the trace, tap [YES] in the confirmation screen; to cancel it, tap [NO]. If the design will not fit in the frame, an error screen (225) is displayed. Tap [RESET], and use the icon to display the frame travel keys, and then move the frame.