Service Documents

SAI OPERATION MANUAL

Issue link: https://docs.hic.us/i/852277

Contents of this Issue

Navigation

Page 62 of 109

61 Chapter 4 Getting the Most Out of the Machine 4 4.10.2 Manually changing the needle position The needle for the sewing start point can be changed by sliding the needle bar case. When the needle bar case can be operated manually, is displayed on the screen. 1. Tap . (Example: In the case of the Home screen) The Manual Color Change screen is displayed. In the color change screen, the needle No. at the current sewing start position is displayed. 2. Tap or . With each tap of , the needle bar case slides. Also, the indication for the needle No. changes. Caution If the frame is brought out while thread is still attached to the fabric, the thread could go slack. And, in such cases, when the embroidery is restarted, the slack in the thread could stick out from the fabric. Please trim the thread manually beforehand to prevent this. "4.10.3 Trimming the thread manually" Keep hands away from the area surrounding the needle bar case. Otherwise, there is a risk of injury due to the movement of the needle bar case. is displayed when the laser crosshair marker is lit.

Articles in this issue

view archives of Service Documents - SAI OPERATION MANUAL