Service Documents

SAI OPERATION MANUAL

Issue link: https://docs.hic.us/i/852277

Contents of this Issue

Navigation

Page 70 of 109

69 Chapter 6 Setting the Machine 6 Settings for the machine, such as those for the embroidery frame or those on how the machine is to be used, are explained in the following. Please refer to this chapter for the convenient settings, such as if you would like to adjust the settings of the network and frame movement, or change the wallpaper of the operation panel. The chart below shows how the embroidery parameters are originally set. These settings can be changed as necessary. Displaying the Embroidery Setting screen 1. Tap on the Home screen. The Setting screen is displayed. 2. Tap . The Embroidery Setting screen is displayed. Chapter 6 Setting the Machine 6.1 Adjusting the embroidery settings Function Details Setting Default setting Thread Detection Detects any breakage in the upper/under thread. YES/NO YES Return stitches Determines whether to sew return stitches at the start of embroidery. YES/NO YES Length of upper thread to remain after trimming thread Length of upper thread to remain after thread is trimmed Long/Middle/ Short Middle Return to marker position Whether to move the needle bar case to the position of the laser crosshair marker when the embroidery is finished YES/NO YES Jump code Conditions governing thread trimming partway through a design [1J] to [9J] 3J

Articles in this issue

view archives of Service Documents - SAI OPERATION MANUAL