Issue link: https://docs.hic.us/i/852277
68 Chapter 5 Lettering Embroidery 5 8. If [Part] was tapped in step 7, tap and select the two characters for which the spacing is to be set. 9. Using , set the character spacing. If [Part] was selected in step 7, repeat steps 8 and 9 to set the character spacing for any character positions that need adjustment. 10.After setting the character spacing, tap . You are returned to the Confirm Image screen, and the character string is displayed using the character spacing that was set. 11.To complete the settings for the character string, tap in the Confirm Image screen. The Needle No. Setting screen is displayed. Set the thread color and needle No. The character spacing can be set to any value from -50 to 100 mm. (The default setting is 0.5 mm.) The two characters that were selected are displayed in red. If the maximum width of a character string is exceeded while setting the character spacing, an error screen is displayed. In such a case, tap [RESET] and change the character spacing.