Issue link: https://docs.hic.us/i/852277
29 Chapter 3 How to Perform Embroidery 3 In the following, we will explain the steps you need to take before performing an embroidery. Using any of the following methods, load the design to be embroidered. • Load from USB memory (USB flash drive) • Load from Record/Favorite • Load from PC via LAN Here, we will explain how a design can be loaded from a USB memory (USB flash drive). For other ways of loading designs: "4.3 Loading designs from records or favorites", "4.4 Loading a design from a PC using a LAN cable" 1. Connect the USB memory (USB flash drive) to the USB port on the side of the operation panel. 2. Tap on the Home screen. The Design Load screen is displayed. 3. Tap . Folders and designs are displayed in the Design List screen. Tap to switch pages. 3.2 Starting the embroidery 3.2.1 Loading the design to be embroidered Use USB 2.0 compatible devices formatted in the FAT/ FAT32 file system. Caution Be aware that some USB memory (USB flash drive) cannot be used due to slight differences in specifications. Never remove a USB memory (USB flash drive) while designs are being read from it. Failure to observe this could result in damage to the USB memory (USB flash drive) or to the internal data of the machine.