Issue link: https://docs.hic.us/i/852277
21 Chapter 2 Getting Ready to Embroider 2 6. As illustrated to the right, place the upper thread on the center thread course of the needle bar case, and then thread it through the hole at the top. 7. As illustrated to the right, thread the upper thread through the needle eye. 8. Replace the thread pressing shaft and press it down until it clicks into place. The upper thread can be threaded through the hole in the take-up lever more easily if it is folded in two. If using a threader (Accessory part), pass the thread through the needle eye as shown below.