Issue link: https://docs.hic.us/i/852277
89 Chapter 7 Using Optional Accessories 7 4. Remove the fastening band from the cap frame, and place the backing on the surface of the holder of the cap frame. 5. Pull out the sweatband from the cap so it is on the outside. 6. Position the visor of the cap so it faces directly upwards, and insert the sweatband under the holder on the cap frame. Push the cap in until the visor reaches the forward edge of the holder. Also, adjust the positioning of the cap so that the center of its visor is aligned with the guide line. 7. Position the fastening band along the base of the cap's visor, then fasten it with the latches. If the fastening band is loose, or too tight, and the cap cannot be held in place using the latch, adjust the position of the latch holder. 1 2