Issue link: https://docs.hic.us/i/852277
97 Chapter 8 Appendix 8 Moving parts in arm 1. Remove the caps from the screws at two places on the cover on the right side. 2. Use a Phillips screwdriver (6 × 100) to remove the screws in two places and remove the side cover. 3. Apply a few drops of oil at the locations shown in the illustration below. • Vicinity of lubrication hole on shaft: (a) • Moving part of lever: (b) • Gold colored bushing: (c) 4. Once the lubrication is completed, replace the right side cover and fasten the screws in both places using a Phillips screwdriver (6 × 100). 5. Re-attach the caps over the screws. The screw caps can be removed more easily if you insert tweezers or other narrow-tipped objects into the hole. (a) (b) (c) (c)