Issue link: https://docs.hic.us/i/852277
88 Chapter 7 Using Optional Accessories 7 6. Turn the drive ring to move the connecting sashes right and left, so the screw holes in the connecting sashes are lined up with the positions of the screw holes in the moving part (two places, at right and left). 7. Insert the knobbed screws into the screw holes in the movable part and fasten them. 1. Install the mounting jig on a stable surface such as a table or stand, and use the clamp to fix it in place. 2. Place the cap frame over the tubular part of the cap frame gauge. 3. Align the cutout portion of the cap frame with the position of the guide on the gauge and push in the cap frame. Keep pushing in until the lock levers (two places) click into place, and the cap frame is secured. If the screw holes are not aligned, slightly loosen the knobbed screws at the lower part (two places, at right and left) set in step 2, and tighten them after aligning the screw holes. 7.1.2 Positioning a cap on the cap frame