Issue link: https://docs.hic.us/i/1518964
Chapter 1 Before Use 1-8 Disconnecting USB flash drives Before disconnecting USB flash drives from computers that the machine is also connected to, click [Stop] in [Safely remove hardware]. Failure to observe these instructions may result in [Error 10 Command Error]. Copy the spool data to the hard disk before printing. Connecting the power cable 1 Insert the power cable into the inlet on the machine. 2 Secure the cable band. • Secure the cable with the cable band attached to the machine. 3 Plug the power plug into a power outlet. Connecting a LAN cable Connect a PC to this product using a LAN cable. Insert a LAN cable until it engages with a click. Network Connection Precautions Make sure the network is set up as follows: Printing is not possible if the network is not set up correctly. • Use a Category 6 or higher LAN cable. • The PC used to transfer print data must be located on the same network as this product. This product cannot be connected via a router. • Use a 1000BASE-T compatible computer or switching hub. Printing requires 1000BASE-T support. Checking the LAN connection 1 Check the display on this product. • Local guidance can be used for checking. Printing is not possible if "100Mbps", "10Mbps", or "No Connect" is displayed. Event email can be used. 2 Check the lamp on the LAN connector. • The LAN connector lamp illuminates when the machine is running. • Plug the power cable into a grounded outlet. Failure to observe these instructions may result in fire or electric shock. • Use only the power cable supplied with the machine. • Always plug the power cable into an outlet near the machine, and make sure the power cable can be easily unplugged. Inlet Power cable Cable band Power plug Power outlet • Do not unplug the cable while data is being transferred. Color Status Overview Green Illuminated Connected via 1000BASE-T Off Connected via a network other than 1000BASE-T 1,000 Mbps is not supported if only the orange lamp is illuminated or flashing. Check the specifications for the PC, peripheral devices, and cable. Orange Illuminated Linked up (connected). Flashing Data being received Off Link down (not connected) INFORMATION LAN Status 1000Mbps