Issue link: https://docs.hic.us/i/1518964
3-9 1 2 3 4 5 6 Chapter 3 Settings Setting auto power-off Automatically turns off the machine after it has been left idle for the specified time. 1 With the screen in local mode, select [MENU] > [MACHINE SETUP], and then press the [ENTER] key. • The MACHINE SETUP menu is displayed. 2 Select [AUTO Power-off] and press the [ENTER] key. 3 Select a setting value and press the [ENTER] key. • Setting value :5–60 min. Setting remaining media display Set whether the remaining amount of media is displayed. 1 With the screen in local mode, select [MENU] > [MACHINE SETUP], and then press the [ENTER] key. • The MACHINE SETUP menu is displayed. 2 Select [MEDIA REMAIN] and press the [ENTER] key. 3 Select a setting value and press the [ENTER] key. • Setting value: ON / OFF Setting the language Changes the display language. 1 With the screen in local mode, select [MENU] > [MACHINE SETUP], and then press the [ENTER] key. • The MACHINE SETUP menu is displayed. 2 Select [LANGUAGE] and press the [ENTER] key. 3 Select a language and press the [ENTER] key. Setting the time You can set the time (time difference) in the country of use. 1 With the screen in local mode, select [MENU] > [MACHINE SETUP], and then press the [ENTER] key. • The MACHINE SETUP menu is displayed. 2 Select [TIME] and press the [ENTER] key. 3 Select a setting value and press the [ENTER] key. • Time selection: Select with []/[] keys • Time input: Set with []/[] keys Setting units (temperature/length) Set the units used by the machine. 1 With the screen in local mode, select [MENU] > [MACHINE SETUP], and then press the [ENTER] key. • The MACHINE SETUP menu is displayed. 2 Select [UNIT / TEMP] or [UNIT / LENGTH] and press the [ENTER] key. 3 Select a setting value and press the [ENTER] key. • Temperature setting value: °C/°F • Length setting: mm/inch Registering and Correcting a Ink Cartridge Required Items Replacing with a New Ink Cartridge Register the eco ink cartridge case weight. 1 Weigh the eco ink cartridge case. With MEDIA REMAIN set to ON The remaining amount of media is displayed in remote mode. With MEDIA REMAIN set to OFF The remaining amount of media is not displayed in remote mode. • The amount of media left is determined by the amount of media fed both by printing and by using the jog keys. • Media length (equivalent to the initial value of the amount remaining) is entered when roll media is detected ( P.2-7 [Entering the remaining amount of media]). • Takes effect when media is detected after this setting is made. • With MEDIA REMAIN set to ON, you can print a list of current media remaining and the date ( P.2-7 [Printing information about the remaining amount of media]). • Can be set in a range of -20 to +4 hours. Eco-case The ink pack and the ink IC chip provided with the ink pack are placed in the eco ink cartridge case. Ink pack Ink IC chip Scale The weight of the cartridge is registered to calculate the amount of remaining ink. Use a scale capable of weighing in 1 g increments. • Do not perform registration if not replacing the eco ink cartridge with a new one. • Do not install the ink pack and the ink IC chip at the stage.