Issue link: https://docs.hic.us/i/1518964
Chapter 6 Appendix 6-2 Specifications Main unit specifications Item TxF150-75 TxF300-75 Remarks Head On-demand piezo head (1 head, 8 nozzles; 180 nozzles per line; pitch between nozzles: 180 dpi) Print resolution x-dpi: 720/1440 y-dpi: 720 Variable dot is sup- ported Ink CMYK + W IC chip-equipped TxF150-75: 6 Carr Cartridge TxF300-75: 8 car Cartridge Ink supply Ink end: weight entry + internal count Ink capacity 1 each of 600ml cartridge CMYK, 2 each of 500ml car- tridge W 1 each of 600ml cartridge CMYK, 4 each of 500ml car- tridge W Compatible media Film Maximum printing width 800 mm At minimum hori- zontal dead space Media specifi- cations Maximum width 810mm Minimum width 210mm Thickness Max. 1.0 mm Roll outside diameter Max. 250 mm Roll weight Max. 45 kg No feed failures due to sagging caused by weight when the roll is retained at both ends Roll inside diameter 2 inches or 3 inches Print side Inside/outside (not required) Take-up treat- ment Taped or loosely affixed to paper core Margin Roll Left and right: 15 mm (default)Front: 120 mmRear: 150 mm Tolerance excluding media skewing: 2 mm Left/right margins: changeable Min. 5 mm Leaf Left and right: 15 mm (default)Front: 120 mmRear: 150 mm Origin alignment (LED pointer) Alignment with the LED pointer mounted on the head actuator Use pointer to change the plotting origin to a value that exceeds the initial value. Excluding media size variation Excluding initial load- ing fluctuations Distance accu- racy Absolute accu- racy ± 0.3 or ±0.3% of specified distance, whichever is larger Reproducibility ± 0.2 or ±0.1 % of specified distance, whichever is larger Perpendicularity ± 0.5/ 1,000 Media skew 5 or less / 10 m Printing gap Manual, three settings (2.0, 2.5, 3.0) Media heater PRE/PRINT/AFTER: 50/50/50 Independent control of the three systems Ink sediment cycle Provided for W Cleaning cartridge Provided Nozzle Missing Detector (NCU) Provided Media cutting Standard Cutting precision (steps): 0.5 mm or lower Waste Ink Tank Bottle type (2000 ml) Image memory 256MB SD-RAM Interface Standard 1) USB 2.0 2)Ethernet；1000BASE-T Command MRL- IV MAPS MAPS4