Issue link: https://docs.hic.us/i/1518964
Chapter 2 Basic Operations 2-3 2 2 2 5 6 Turning the Power On/ Off Turning the power on The machine has two power switches. [END/POWER] key: Normally, use this key to turn the power on or off. Main power switch: On the side of the machine. 1 Turn the main power switch on. • The firmware version is displayed when the power is turned on, and initial operations are performed. 2 Press the [END/POWER] key to turn on power. • The machine enters local mode. 3 Turn on the connected computer. Turning the power off After using the machine, press the [END/POWER] key on the front to turn it off. Before turning the machine off, check the following: • If the machine is receiving RIP data from the computer, or if any data has not been printed yet • If the carriage has returned to the capping station • If any errors have occurred ( P.5-6 [Error messages]) 1 Turn off the connected computer. 2 [END/POWER] key a long press. • " Turn off power?[ent] " is displayed. 3 Press the [ENTER] key. • Do not turn off the main power switch on the side of the machine. • To use the machine again, press the [END/ POWER] key. Precautions on turning the power off Do not turn the main power switch off. Turning off the main power switch will prevent automatic maintenance from working, which may result in nozzle clogging. Check the carriage position before turning the machine off. Turning the power off without the carriage returned to the capping station may result in the head nozzle surface drying out, which is a factor for nozzle clogging. In this case, turn the machine on again and confirm that the carriage has returned to the capping station before turning the machine off. Do not turn the power off during printing. This may prevent the head from returning to the capping station. Press the [END/POWER] key to turn off the power before turning off the main power switch. If you must turn off the main power switch when moving the machine or clearing an error, be sure to hold down the [END/POWER] key on the front and confirm that the operating panel display is off before turning off the main power switch. • Do not turn off the main power supply. Turning off the main power supply will disable the auto- matic maintenance function (including nozzle clogging prevention function and ink discharge channel cleaning function). This increases the risk of ejection failures (such as nozzle clogging or deflection). • Make sure the maintenance cover is closed before turning the machine on. Main power switch [END/POWER] key [END/POWER] key