Issue link: https://docs.hic.us/i/1518964
Chapter 2 Basic Operations 2-7 2 2 2 5 6 12 Press the [] key to detect the media. • The media width is detected. • When the [MEDIA RESIDUAL] maintenance function is set to "ON" ( P.3-9 [Setting remaining media display]), a screen for entering the remaining amount of media is displayed after media width is detected. Entering the remaining amount of media When you have set the [MEDIA RESIDUAL] maintenance function to "ON" ( P.3-9 [Setting remaining media display]), after media width is detected, a screen is displayed for entering the remaining amount of media. 1 Display the screen for entering the remaining amount of media. 2 Press the jog keys to enter the amount of media remaining. 3 Press the [ENTER] key. Printing information about the remaining amount of media When you have set the [MEDIA RESIDUAL] maintenance function to "ON" ( P.3-9 [Setting remaining media display]), you can print a list of the current date and remaining amount of media. 1 With the screen in local mode, press the jog keys. • The machine enters origin setup mode. 2 Press the [FUNC3] key. • A confirmation screen is displayed for printing the remaining amount of media. 3 Press the [ENTER] key. • The machine begins printing information about the remaining amount of media. Changing the printing origin The position of the print origin can be changed. Move the LED pointer to the new position to determine the position. 1 With the screen in local mode, press the jog keys. • The machine enters origin setup mode. 2 Press the jog keys and align the light point of the LED pointer with the new printing origin to set. • Select by moving the carriage and media. 3 After determining the origin, press the [ENTER] key. • The origin is updated. Guidelines for setting the origin position In the depth direction (X'), the printing origin should be about 75 mm back from the cutting slot on the platen. In the scanning direction (Y'), the printing origin should be 15 mm from the right edge of the media. This can be changed in the [MARGIN] setting menu ( P.3-5 [Margin (left/right)]). It can also be changed using the jog keys. 50.0m Enter the MEDIA REMAIN PRE PRINT POST MEDIA REMAIN 30°/40° 30°/35° 40°/50° X 0.0 Y 0.0 PRE PRINT POST SET ORIGIN 30°/40° 30°/35° 40°/50° Cutting slot approx. 75 mm (X') 15 mm (Y')