Issue link: https://docs.hic.us/i/1518964
Chapter 2 Basic Operations 2-4 Loading Media The machine is designed to use roll media. For details on compatible media, see P.6-2 [Specifications]. Adjusting head height Adjust the head height to suit media thickness. 1 Move the carriage over the platen. • When the machine is on: Execute [ST.MAINTENANCE - CARRIAGE OUT] (maintenance function). • When the machine is off: Move the carriage manually. 2 Loosen the screws on the front. • Loosen the screws, rotating each by one turn using a flathead screwdriver. 3 Adjust the height adjustment lever to suit the media. • Referring to P.2-4 [Adjustment lever and range], adjust the position of the lever. • Ensure that the height adjustment lever is set to the upper or lower position. Setting it to an intermediate height will cause printing errors. 4 Fix the carriage. • Tighten the screws securely so that they do not loosen. 5 Return the carriage to the station position. Adjustment lever and range • When loading roll media, be careful not to drop it on your feet or other body parts. Failure to observe these instructions may result in injury. • At least two people must work together to load roll media. Working alone may result in back injury from the weight of rolls. • Adjust the head height before loading media. Adjusting the head height after loading media may result in jamming, reduced print quality, or head damage. ＞ ＰＢ Ｔ ＜ Carriage • When you have set the height adjustment lever to the L or H range, do not press the height adjustment lever down or up when tightening the screws. Range Head height Remarks L range (recommended) 2 mm (position set as shipped) The base of the head height can be raised by 1– 2 mm. Contact a Mimaki sales representative for details. M range 2.5 mm H range 3 mm • Mist is more likely to be generated when the "M range" or "H range" is used. Height adjustment lever