Issue link: https://docs.hic.us/i/1518964
3-11 1 2 3 4 5 6 Chapter 3 Settings 1 With the screen in local mode, select [MENU] > [MACHINE SETUP], and then press the [ENTER] key. • The MACHINE SETUP menu is displayed. 2 Select [SPACE FEED MODE] and press the [ENTER] key. 3 Select a setting value and press the [ENTER] key. • INTERMITTENT: Feeds intermittently based on a fraction of a printing pass. • CONTINUOUS: Feeds by skipping blank parts all at once. Setting the network 1 With the screen in local mode, select [MENU] > [MACHINE SETUP], and then press the [ENTER] key. • The MACHINE SETUP menu is displayed. 2 Select [NETWORK] > [Check IP ADDRESS], and then press the [ENTER] key. • The machine's current IP address is displayed. • After you have checked it, press the [ENTER] key. 3 Select [Check MAC ADDRESS] and press the [ENTER] key. • The machine's current MAC address is displayed. • After you have checked it, press the [ENTER] key. 4 Select [DHCP] and press the [ENTER] key. 5 Select a setting value and press the [ENTER] key. • Setting value: ON / OFF • Set to ON to use an IP address set by the DHCP server. 6 Select [AutoIP] and press the [ENTER] key. 7 Select a setting value and press the [ENTER] key. • Setting value: ON / OFF • Set to ON to use an IP address set by the AutoIP protocol. Note that DHCP is given priority when DHCP is set to ON. 8 Select [IP ADDRESS] and press the [ENTER] key. 9 Select a setting value and press the [ENTER] key. • Setting value: ON / OFF • You can set an IP address when both DHCP and AutoIP are set to OFF. In other cases, go to step 14. 10 Press the key. • Setting items for the default gateway, DNS address, and subnet mask are displayed. • You can set the default gateway, DNS address, and subnet mask when both DHCP and AutoIP are set to OFF. In other cases, go to step 12. 11 Select a setting item and press the [ENTER] key. 12 Select a setting value and press the [ENTER] key. • It takes some time after a network connection is established until the IP address is determined. "0.0.0.0" is displayed when the IP address has not been determined yet. • Restart the machine to apply network settings.