Mimaki

Chapter 3 Settings 3-20

• Cover
• Contents
• Introduction
• Caution
• Requests
• FCC statement (USA)
• TV and radio interference
• Compatible ink
• Safety Precautions
• Symbols
• Working Environment
• Place of installation
• Temperature of working environment
• Warning Labels
• Chapter 1 Before Use
• Part Names and Functions
• Front
• Rear/side
• Operating panel
• Media sensor
• Carriage
• Cutter blade and cutting slot
• Capping station
• Pinch rollers and grit rollers
• Connecting Cables
• Connecting a USB 2.0 interface cable
• Inserting Ink Cartridges
• Precautions on handling ink cartridges
• Inserting ink cartridges
• When Ink Level Low or Ink Near End is Displayed
• Ink cartridge lamps
• Machine restrictions
• Replacing Ink
• Menu Mode
• Chapter 2 Basic Operations
• Workflow
• Turning the Power On/ Off
• Turning the power on
• Turning the power off
• Loading Media
• Adjusting head height
• Loading roll media
• Changing the printing origin
• Preparing the Heater
• Changing heater temperature settings
• Test Printing
• Test printing
• Head Cleaning
• About head cleaning
• Performing head cleaning based on test printing results
• Feed Correction Settings
• Feed correction
• If the Positions of Dots Shift
• Printing Data
• Starting printing
• Pausing printing
• Clearing received data (Data Clear)
• Cutting media
• Chapter 3 Settings
• Setup Menu
• Setup menu table
• Registering optimal print conditions to match usage
• Feed correction
• Dot position correction
• Heater
• Logical seek
• Drying time
• Margin (left/right)
• Vacuum fan
• Feed speed
• MAPS
• Auto cleaning
• Interval wiping
• Machine Setup Menu
• Machine setup menu table
• Setting auto power-off
• Setting remaining media display
• Setting the language
• Setting the time
• Setting units (temperature/length)
• Registering and Correcting a Ink Cartridge
• Setting the key buzzer
• Setting view feed
• Setting space feed mode
• Setting the network
• Setting the event mail function
• Initializing settings
• Nozzle Check Menu
• Nozzle check menu table
• Nozzle check flow during printing
• Printing operations when nozzle clogging is determined or errors occur
• Setting nozzle checking during printing
• Setting auto nozzle recovery
• Setting judgment conditions
• Information Menu
• Information menu table
• Displaying information
• Chapter 4 Maintenance
• Performing Maintenance
• Maintenance items and timing
• Tools required for maintenance
• Routine Maintenance
• Ink maintenance
• Cleaning the wiper and cap
• Cleaning the wiper cleaner
• Cleaning the wiper ink guard
• Cleaning under the carriage
• NCU Cleaning
• Cleaning the waste ink draining channel
• Cleaning head nozzles
• Preparing the machine if it will not be used over extended periods
• Cleaning media sensors
• Cleaning media holders
• Cleaning the platen
• Cleaning exterior surfaces
• Cleaning jam sensors
• Maintenance Functions
• Nozzle recovery function
• Auto Maintenance Functions
• Filling with ink
• Replacing Consumables
• Replacing wipers
• Replacing exhaust box filters
• Replacing the CP pad set
• Replacing pinch rollers
• Replacing fan filters
• Replacing cutter blades
• Waste Ink Tank
• In case of messages to check waste ink
• Examples of Printing Issues
• Recovering from nozzle ejection failure
• Recovering from frequent nozzle dropout and nozzle ejection failures of white
• Chapter 5 Troubleshooting
• Troubleshooting
• Power does not turn on
• Printing is not possible
• Media jams or is dirty
• Heater temperature does not rise to the set level
• Image quality is poor
• Nozzles are clogged
• Ink cartridge warning appears
• Ink leakage occurs
• Warning/Error Messages
• Warning messages
• Error messages
• Chapter 6 Appendix
• Specifications
• Main unit specifications
• Ink specifications
• Order for Loading Ink Cartridges
• LICENSE Library