Issue link: https://docs.hic.us/i/1518964
3-13 1 2 3 4 5 6 Chapter 3 Settings 8 Select [Authentication] and press the [ENTER] key. 9 Specify the method of authentication and press the [ENTER] key. • Sets the method of SMTP server authentication. • If you have selected OFF, go to step 17. 10 Select [USER NAME] and press the [ENTER] key. 11 Specify the user name and press the [ENTER] key. • Press [ ] / [ ] / [ ] / [ ] to set the user name used for authentication. • Use alphanumeric characters and symbols (up to 30 characters). 12 Select [PASS WORD] and press the [ENTER] key. 13 Specify the password and press the [ENTER] key. • Press [ ] / [ ] / [ ] / [ ] to set the password used for authentication. • Use alphanumeric characters and symbols (up to 15 characters). • If you have selected [POP before SMTP], set the items in step 13–16. 14 Select [POP3 Address] and press the [ENTER] key. 15 Specify the POP3 address and press the [ENTER] key. • Press [ ] / [ ] / [ ] / [ ] to set the POP server. Enter the POP server name. 16 Select [APOP] and press the [ENTER] key. 17 Select a setting value and press the [ENTER] key. • Setting value: ON / OFF Sending test email 1 With the screen in local mode, select [MENU] > [MACHINE SETUP], and then press the [ENTER] key. • The MACHINE SETUP menu is displayed. 2 Select [EVENT MAIL] > [TRANSMIT TEST], and then press the [ENTER] key. 3 Press the [ENTER] key. • Results of transmission are displayed. • If testing email transmission fails, an error code is displayed. • Depending on the server used, the machine may not be able to send emails unless you set up an email address corresponding to your account. • The password setting screen only allows you to check the value you are currently entering. • Results of testing email transmission represents the result of transmission as performed by the machine to the mail server. It does not indicate that email was received at the address. • If the recipient has set up a spam filter or the like, email may not reach them even if the machine indicates that it has been sent. • If testing email transmission fails, the following error codes are displayed. • If the error cannot be resolved, wait a while and try again. • For server settings and similar information, con- tact your network administrator or the provider. Transmit Test Failed: 12345: ent Error code