Issue link: https://docs.hic.us/i/1518964
Chapter 5 Troubleshooting 5-7 1 2 2 2 5 An error occurred in the main PCB power supply. • Temporarily turn off the main power supply, and then turn it on again. If the message appears again, contact your dealer, or our sales office or call center. An error occurred in the COM16 PCB power supply. An error occurred in the slider E PCB power supply. The machine received data other than print data. Otherwise, an error occurred with the transmitted print data. • Securely connect the interface cable. Use an interface cable conforming to the specifications. An error occurred with the transmitted print data. An error occurred with USB communica- tion. • Temporarily turn off the main power supply, and then turn it on again. If the message appears again, contact your dealer, or our sales office or call center. The X motor was overloaded. The Y motor was overloaded. An overcurrent error was detected in the X motor. An overcurrent error was detected in the Y motor. Media has jammed. • Remove and reload the media. Message Cause Corrective action ERROR 18a Main PCB V_CORE ERROR 18c Main PCB V12 ERROR 190 Main PCB V42-1 ERROR 192 COMIO PCB V1R2 ERROR 193 COMIO PCB V2R5 ERROR 194 COMIO PCB V3R3 ERROR 195 COMIO PCB V24 ERROR 1a0 SLDR2H PCB V1R2 ERROR 1a6 SLDR2H PCB V2R5 ERROR 1a7 SLDR2H PCB V3R3 ERROR 1a8 SLDR2H PCB V5 ERROR 1a9 SLDR2H PCB V42 ERROR 201 COMMAND ERROR ERROR 202 PARAMETER ERROR ERROR 304 USB INIT ERR ERROR 305 USB TIME OUT ERROR 401 MOTOR X ERROR 402 MOTOR Y ERROR 403 X Current ERROR 404 Y Current ERROR 505 MEDIA JAM